Download Free Pass4sure 642-066 ARSFE 2.95 | Latest P4S Passforsure Certification Braindumps

Pass4sure 642-066 ARSFE 2.95

Filed under: Pass4sure Cisco — admin @ 6:31 pm September 26, 2008

Advanced Routing and Switching for Field Engineers

Exam Number: 642-066
Associated Certifications: Advanced Routing and Switching for Field Engineers
Duration: 75 minutes (60-70 Questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions

Exam Description Exam Topics
Exam Description
The 642-066 ARSFE Advanced Routing and Switching for Field Engineers exam is the exam associated with the Cisco Routing and Switching Field Specialist certification. This exam tests a candidate’s knowledge of configuring and implementing the advanced capabilities of Cisco routing and switching solutions; verifying and troubleshooting the advanced capabilities of Cisco routing and switching solutions.. Candidates can prepare for this exam by taking the ARSFE Advanced Routing and Switching for Field Engineers course.

Exam Topics
The following topics are general guidelines for the content likely to be included on the Remote Access exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Configure and implement the advanced capabilities of Cisco routing and switching solutions
Configure and implement the advanced capabilities of Cisco routers and Catalyst switches
Implement MPLS
Implement High Availability features
Implement and configure network management

Verify and troubleshoot the advanced capabilities of Cisco routing and switching solutions
Verify and troubleshoot the advanced capabilities of Cisco routers and Catalyst switches
Verify and troubleshoot a QoS Design
Verify and troubleshoot an MPLS design
Verify and troubleshoot a High Availability design
Verify and troubleshoot Cisco devices in a multi vendor device environment
Verify and troubleshoot network management configurations

Question: 1
Exhibit

Which Catalyst switch configuration would protect a customer network from possible disruption in the case in which an unauthorized switch is added to the network?

A. Switch0#show running-configuration
!
hostname Switch0
!
no spanning-tree optimize bpdu transmission spanning-tree extend system-id
!
interface FastEthernet0/1
switchport protected
!
B. Switch0#show running-configuration
!
hostname Switch0
!
spanning-tree portfast bpduguard default
no spanning-tree optimize bpdu transmission spanning-tree extend system-id
!
interface FastEthernet0/1
spanning-tree guard root
!
C. Switch0#show running-configuration
!
hostname Switch0
!
no spanning-tree optimize bpdu transmission spanning-tree extend system-id
!
interface FastEthernet0/1
switchport mode access
!
D. Switch0#show running-configuration
!
hostname Switch0

Exam Name: Advanced Routing and Switching for Field Engineers
Exam Type: CISCO
Exam Code: 642-066 Total Questions: 68

!
no spanning-tree optimize bpdu transmission spanning-tree extend system-id
!
interface FastEthernet0/1
switchport port-security violation restrict
!
Answer: B Question: 2
While troubleshooting a network outage, you discover that an employee brought a switch from home into the office to connect additional equipment to the network. In order to increase his
speed, he connected this switch to both network ports in his office, resulting in a bridge loop. Which of these can you implement to prevent future occurrences of this issue?

A. RSTP
B. root guard
C. BPDU guard
D. GLBP
Answer: C Question: 3
Exhibit

For the given configuration, on packets leaving the router on interface FastEthernet0/0 that matches the high traffic class, what will the MPLS experimental bit be set to?

A. 0
B. 1
C. 2
D. 3

Exam Name: Advanced Routing and Switching for Field Engineers
Exam Type: CISCO
Exam Code: 642-066 Total Questions: 68

E. 4
F. 5
Answer: D Question: 4
Which tool allows a LAN client to determine which router should be the first hop to a particular remote destination, allowing simplified client configuration and processing without creating a single point of failure?

A. Proxy ARP
B. Dynamic Routing Protocol
C. IRDP D. VRRP
Answer: D Question: 5
When implementing MPLS VPNs between CE and PE routers, which of these statements is
correct?

A. If using IS-IS as the PE-CE routing protocol, no redistribution is required.
B. If using static routes between the CE and PE routers, no redistribution of other VPN routes is required.
C. If the PE-CE protocol is not BGP, redistribution of other VPN routes from MP-BGP is required.
D. If RIP is the routing protocol that is used between the PE-CE routers, no redistribution is required, but any other protocol will require redistribution.
E. If using OSPF or EIGRP as the PE-CE routing protocol, redistribution is not required, but any other protocol or static route will require redistribution.
Answer: C Question: 6
You would like to log messages up to the severity level “Notification.” Which three of these
commands will you need to issue in order to enable syslog messages to be sent to the syslog server at the IP address 10.1.5.5? (Choose three.)

A. logging on
B. logging host 10.1.5.5
C. logging trap notifications
D. logging syslog notifications E. logging monitor notifications F. logging console notifications
Answer: A, B, C Question: 7
Exhibit

Exam Name: Advanced Routing and Switching for Field Engineers
Exam Type: CISCO
Exam Code: 642-066 Total Questions: 68

What is the HSRP state and priority of this interface after HSRP reaches its steady state?

A. Active, Priority 151
B. Active, Priority 201
C. Active, Priority 251
D. Standby, Priority 151
E. Standby, Priority 201
F. Standby, Priority 251
Answer: D Question: 8
While your MPLS core is using Cisco routers, the core of a company you have acquired is not. After extending your MPLS VPN networks by integrating the cores, you discover that the end-to- end LPS path between PE routers cannot be established.
Which of the following may have caused this problem?

A. the MTUs do not match
B. the BGP protocol versions do not match
C. MPLS is not supported between different vendors
D. MP-BGP is not supported between different vendors
E. you are using Cisco proprietary TDP in your existing core
Answer: E Question: 9
You are troubleshooting an issue which is causing full-sized packets entering the MPLS cloud to be dropped. You have discovered that one of the switches in the MPLS core is not a Cisco
switch, but otherwise the MPLS MTU size is set to 1508 bytes on the routers. Based on this information, which of these may be the reason the packets are being dropped?

A. no switches support oversized packets
B. by definition, the maximum MTU is 1500 bytes
C. the switch on your MPLS core that was not produced by Cisco does not support oversized packets
D. in this situation, the MTU setting is irrelevant; in MPLS the maximum acceptable IP packet size
is 1492 bytes
E. as MPLS VPN labeling increases the size of the packet by 8 bytes, the IP MTU should have been changed to 1508

Answer: C
Free 642-066 Exams’s PDF Download
Free Testking offers free demo for 642-066 PDF(Advanced Routing and Switching for Field Engineers). You can check out the interface, question quality and usability of our practice exams . We are the only one site can offer demo for almost all Advanced Routing and Switching for Field Engineers.

Recommended Training about 642-066 exam PDF
The following courses are the recommended training for 642-066 exam PDF.
642-066 Q & A with Explanations
642-066 Audio Exam
642-066 Study Guide
642-066 Preparation Lab
642-066 Exam Preparation from
Exam Number/Code: 642-066
Exam Name: Advanced Routing and Switching for Field Engineers

“Advanced Routing and Switching for Field Engineers”, also known as 642-066 exam, is a Cisco certification.
Preparing for the 642-066 exam? Searching 642-066 Test Questions, 642-066 Practice Exam, 642-066 Dumps?

With the complete collection of questions and answers, Pass4sure has assembled to take you through 68 Q&As to your 642-066 Exam preparation. In the 642-066 exam resources, you will cover every field and category in Access Routing and LAN Switching helping to ready you for your successful Cisco Certification.

Questions and Answers : 68 Q&As
Updated: April 12th , 2008
Market Price: $125.99
Member Price: $99.90

Free Pass4sure 642-066 ARSFE
Interactive Testing Engine Included!
146 Questions
Updated : 09/18/2008
Price : $87.99 $79.99
Free download?pass4sure 642-066 ARSFE
Free download?testking 642-066 ARSFE

PassGuide Braindumps: provides high quality Cisco exam practice questions and Training Materials.Hel you Pass Cisco Certifications passguide cisco exams